Products

  • SDS MAX Hammer Drill Bits DIN8035

    Feature:
    – DIN8035
    – tungsten carbide tip in special alloy
    – special brazing process to withstand extreme heat
    – straight shank with four(S4)or single grooves
    – right hand cut
    – SDS MAX shank
    Flute:
    Square (U),Diagonal(L),S4 flute are avaiable
    Tip:
    single(“-“), Cross(“+”), ”W” tip are avaiable
    Applications:
    – concrete, marble
    – tiles, granite and brick walls
  • SDS PLUS Hammer Drill Bits DIN8035

    Feature:
    – DIN8035
    – tungsten carbide tip in special alloy
    – special brazing process to withstand extreme heat
    – straight shank with four(S4)or single grooves
    – right hand cut
    – SDS PLUS shank
    Flute:
    Square (U),Diagonal(L),S4 flute are avaiable
    Tip:
    single(“-“), Cross(“+”), ”W” tip are avaiable
    Applications:
    – concrete, marble
    – tiles, granite and brick walls
  • Taper Shank Concrete Drill Bits

  • Tapcon Drill Bits

    Ensures the precise drilling of pilot holes when installing Tapcon Anchors.
    A masonry drill bit with a carbide tip.
    For installing 3/16” Tapcon Fasteners, use a 5/32” drill bit.
    For installing 1/4 ” Tapcon Fasteners, use a 3/16” drill bit.
  • DIN8039 Concrete Drill Bits

    Technical data
    – Standard: DIN 8039
    – high-strength soldering of the carbide tip
    – galvanized
    – cylindrical shank
    – right hand cut
    Surface:
    Sand blasted ,Zinc,Chromed,Black etc.are avaiable
    Flute:
    Round(R),Square (U),Diagonal(L),S4,Helix flute are avaiable
    Shank:
    Straight shank , Three Flat , Hex Shank , Taper Shank
    Applications
    – for stone, masonry, concrete
    – light building materials and similar materials
    – also suitable for ceramic tiles (with a center punch)
  • DIN1870 Morse Taper Extra Long Drill

    Technical data
    – Standard: DIN 1870
    – Material : HSS, HSS M2,M35
    – Process: Rolled , Fully ground
    – Surface: black , white , Titanium coated, Amber
    – Normal Point
    – Point angle: 118°
    – Point cut: type N
    – Cutting Direction: right-hand cut
    – Morse Taper shank
    – Tolerance: h8
    – Helix angle: 20-30°
    Applications
    – materials up to 900N/mm²
    – alloyed and not alloyed steels, castings
    – sintered metals, wood, plastics
    – graphite, bronze, brass
  • DIN341 Morse Taper Long Type Drill Bits

    Technical data
    – Standard: DIN 341
    – Material : HSS, HSS M2,M35
    – Process:  Fully ground
    – Surface: black , white , Titanium coated, Amber
    – Normal Point
    – Point angle: 118°
    – Point cut: type N
    – Cutting Direction: right-hand cut
    – Morse Taper shank
    – Tolerance: h8
    – Helix angle: 20-30°
    Applications
    – materials up to 900N/mm²
    – alloyed and not alloyed steels, castings
    – sintered metals, wood, plastics
    – graphite, bronze, brass
  • DIN345 Morse Taper Shank Drill Bits

    Technical data
    – Standard: DIN 345
    – Material : HSS, HSS M2,M35
    – Process: Rolled , Fully ground
    – Surface: black , white , Titanium coated, Amber
    – Normal Point
    – Point angle: 118°
    – Point cut: type N
    – Cutting Direction: right-hand cut
    – Morse Taper shank
    – Tolerance: h8
    – Helix angle: 20-30°
    Applications
    – materials up to 900N/mm²
    – alloyed and not alloyed steels, castings
    – sintered metals, wood, plastics
    – graphite, bronze, brass
  • DIN333A/B HSS Centre Drill Bits

    Technical data
    – Standard: DIN 333A
    – Centre Angle : 60°
    – Point angle: 120°
    – Material : HSS, HSS M2,M35
    – Process: fully ground
    – Surface: black , white , Titanium coated
    – Point cut: type N
    – Cutting Direction: right-hand cut
    – Tolerance: h9
    Applications
    – For Making centre holes according to DIN332 sharp A
    – center drills have flutes and cutting points on both ends. this allows the user with the ability to reverse the drill and utilize both ends.
    – Available for all Kinds of Materials: Metal, Alloy, Copper, Iron, Wood, Aluminum, and so on.
  • Silver & Deming Drill Bits

    Features:
    – 1/2”Reduced shank
    – 3 Flats on shank or Straight shank
    – 118° or 135° Split Point
    – Material : HSS, HSS M2,M35(Cobalt 5%)
    – Process: Milled Ground
    – Point cut: type N
    – Cutting Direction: right-hand cut
    Applications
    – Ideal for portable drilling and drill presses, where the maximum chuck capacity is 1/2″ .
    – Used extensively in machine shops, maintenance departments, garages and body shops .
    – Strong web construction provides greater strength and rigidity to drill in hard-to-drill materials like stainless steel and titanium alloys
  • Double Ended Drill Bits

    Technical data
    – Material : HSS, HSS M2,M35
    – Process: fully ground
    – Surface: black , white , Titanium coated
    – Split point DIN1412C
    – Point angle: 118° or 135°
    – Point cut: type N
    – Cutting Direction: right-hand cut
    – Cylindrical / Straight shank
    – Tolerance: h8
    – Helix angle: 25-30°
    Applications
    – materials up to 900N/mm²
    – alloyed and not alloyed steels, castings
    – sintered metals, wood, plastics
    – graphite, bronze, brass
  • DIN1869 Extra Long Type Drill Bits

    Technical data
    – Standard: DIN 1869
    – Material : HSS, HSS M2,M35
    – Process: fully ground
    – Surface: black , white , Titanium coated
    – Split point DIN1412C
    – Point angle: 118° or 135°
    – Point cut: type N
    – Cutting Direction: right-hand cut
    – Cylindrical / Straight shank
    – Tolerance: h8
    – Helix angle: 25-30°
    Applications
    – materials up to 900N/mm²
    – alloyed and not alloyed steels, castings
    – sintered metals, wood, plastics
    – graphite, bronze, brass