HSS Twist Drill Bits

  • Read More
    Quick View

    1/2” Shank Silver & Deming Drill Bits
    Features:
    – 1/2”Reduced shank
    – 3 Flats on shank or Straight shank
    – 118° or 135° Split Point
    – Material : HSS, HSS M2,M35(Cobalt 5%)
    – Process: Milled Ground
    – Point cut: type N
    – Cutting Direction: right-hand cut
    Applications
    – Ideal for portable drilling and drill presses, where the maximum chuck capacity is 1/2″ .
    – Used extensively in machine shops, maintenance departments, garages and body shops .
    – Strong web construction provides greater strength and rigidity to drill in hard-to-drill materials like stainless steel and titanium alloys
  • Read More
    Quick View

    DIN333A HSS Centre Drill Bits
    Technical data
    – Standard: DIN 333A
    – Centre Angle : 60°
    – Point angle: 120°
    – Material : HSS, HSS M2,M35
    – Process: fully ground
    – Surface: black , white , Titanium coated
    – Point cut: type N
    – Cutting Direction: right-hand cut
    – Tolerance: h9
    Applications
    – For Making centre holes according to DIN332 sharp A
    – center drills have flutes and cutting points on both ends. this allows the user with the ability to reverse the drill and utilize both ends.
    – Available for all Kinds of Materials: Metal, Alloy, Copper, Iron, Wood, Aluminum, and so on.
  • Read More
    Quick View

    ANSI Standard Morse Taper Shank Drills
    Technical data
    – Standard: ANSI
    – Material : HSS, HSS M2,M35
    – Process: Rolled , Fully ground
    – Surface: black , white , Titanium coated, Amber
    – Normal Point
    – Point angle: 118°
    – Point cut: type N
    – Cutting Direction: right-hand cut
    – Morse Taper shank
    – Tolerance: h8
    – Helix angle: 20-30°
    Applications
    – materials up to 900N/mm²
    – alloyed and not alloyed steels, castings
    – sintered metals, wood, plastics
    – graphite, bronze, brass
  • Read More
    Quick View

    Three Flat Shank Drills
    Technical data
    – Three Flat Shank
    – Standard: ANSI B94.11M Jobber Length
    – Material : HSS, HSS M2, HSS M35 CO5%
    – Process: fully ground
    – Surface: black , white , Titanium coated , Black & Golden
    – Split point DIN1412C
    – Point angle: 118° or 135°
    – Point cut: type N
    – Cutting Direction: right-hand cut
    – Tolerance: h8
    – Helix angle: 25-30°
    Applications
    – materials up to 900N/mm²
    – alloyed and not alloyed steels, castings
    – sintered metals, wood, plastics
    – graphite, bronze, brass
  • Read More
    Quick View

    Hex Shank Drills
    Technical data
    – Standard: DIN 338
    – 1/4” Hex shank
    – Material : HSS, HSS M2,M35
    – Process: fully ground
    – Surface: black , white , Titanium coated
    – Split point DIN1412C
    – Point angle: 118° or 135°
    – Point cut: type N
    – Cutting Direction: right-hand cut
    – Cylindrical / Straight shank
    – Tolerance: h8
    – Helix angle: 25-30°
    Applications
    – materials up to 900N/mm²
    – alloyed and not alloyed steels, castings
    – sintered metals, wood, plastics
    – graphite, bronze, brass
  • Read More
    Quick View

    1/2” Reduced Shank Silver & Deming Drills
    Features:
    – 1/2”Reduced shank
    – 3 Flats on shank or Straight shank
    – 118° or 135° Split Point
    – Material : HSS, HSS M2,M35(Cobalt 5%)
    – Process: Milled Ground
    – Point cut: type N
    – Cutting Direction: right-hand cut
    Applications
    – Ideal for portable drilling and drill presses, where the maximum chuck capacity is 1/2″ .
    – Used extensively in machine shops, maintenance departments, garages and body shops .
    – Strong web construction provides greater strength and rigidity to drill in hard-to-drill materials like stainless steel and titanium alloys
  • Read More
    Quick View

    Double Ended Drills
    Technical data
    – Material : HSS, HSS M2,M35
    – Process: fully ground
    – Surface: black , white , Titanium coated
    – Split point DIN1412C
    – Point angle: 118° or 135°
    – Point cut: type N
    – Cutting Direction: right-hand cut
    – Cylindrical / Straight shank
    – Tolerance: h8
    – Helix angle: 25-30°
    Applications
    – materials up to 900N/mm²
    – alloyed and not alloyed steels, castings
    – sintered metals, wood, plastics
    – graphite, bronze, brass
  • Read More
    Quick View

    Aircraft Extension Drill Bits
    Features : 
    – 6” 12” Aircraft Extension Drill Bits
    – Manufactured to National Aerospace Standard 907
    – HSS M2 M35
    – 135° split point is self-centering and reduces thrust
    – Sizes smaller than #52 and 1/16 have the 118° standard point
    –  Ideal for drilling in mild steels where extra length for reach is required
    Applications : 
    – For use in the Aircraft manufacturing industry
  • Read More
    Quick View

    Taper Length Twist Drill Bit
    Technical data
    – Standard: ANSI B94.11M Taper Length Drill
    – Material : HSS, HSS M2,M35
    – Process: fully ground
    – Surface: black , white , Titanium coated
    – Split point DIN1412C
    – Point angle: 118° or 135°
    – Point cut: type N
    – Cutting Direction: right-hand cut
    – Cylindrical / Straight shank
    – Tolerance: h8
    – Helix angle: 25-30°
    Applications
    – materials up to 900N/mm²
    – alloyed and not alloyed steels, castings
    – sintered metals, wood, plastics
    – graphite, bronze, brass
  • Read More
    Quick View

    Screw Machine Drill Bit
    Technical data
    – Standard: ANSI B94.11M Screw Machine Drill
    – Material : HSS, HSS M2, M35
    – Process: fully ground
    – Surface: black , white , Titanium coated, Amber
    – Split point DIN1412C
    – Point angle: 118° or 135°
    – Point cut: type N
    – Cutting Direction: right-hand cut
    – Cylindrical / Straight shank
    – Tolerance: h8
    – Helix angle: 25-30°
    Applications
    – materials up to 900N/mm²
    – alloyed and not alloyed steels, castings
  • Read More
    Quick View

    Jobber Length Drill Bit
    Technical data
    – Standard: ANSI B94.11M Jobber Length
    – Material : HSS, HSS M2, HSS M35 CO5%
    – Process: fully ground
    – Surface: black , white , Titanium coated
    – Split point DIN1412C
    – Point angle: 118° or 135°
    – Point cut: type N
    – Cutting Direction: right-hand cut
    – Cylindrical / Straight shank
    – Tolerance: h8
    – Helix angle: 25-30°
    Applications
    – materials up to 900N/mm²
    – alloyed and not alloyed steels, castings
    – sintered metals, wood, plastics
    – graphite, bronze, brass
  • Read More
    Quick View

    DIN1870 Morse Taper Extra Long Drill
    Technical data
    – Standard: DIN 1870
    – Material : HSS, HSS M2,M35
    – Process: Rolled , Fully ground
    – Surface: black , white , Titanium coated, Amber
    – Normal Point
    – Point angle: 118°
    – Point cut: type N
    – Cutting Direction: right-hand cut
    – Morse Taper shank
    – Tolerance: h8
    – Helix angle: 20-30°
    Applications
    – materials up to 900N/mm²
    – alloyed and not alloyed steels, castings
    – sintered metals, wood, plastics
    – graphite, bronze, brass