-
DIN1870 Morse Taper Extra Long Drill
Technical data
– Standard: DIN 1870
– Material : HSS, HSS M2,M35
– Process: Rolled , Fully ground
– Surface: black , white , Titanium coated, Amber
– Normal Point
– Point angle: 118°
– Point cut: type N
– Cutting Direction: right-hand cut
– Morse Taper shank
– Tolerance: h8
– Helix angle: 20-30°
Applications
– materials up to 900N/mm²
– alloyed and not alloyed steels, castings
– sintered metals, wood, plastics
– graphite, bronze, brass
-
Double Ended Drill Bits
Technical data
– Material : HSS, HSS M2,M35
– Process: fully ground
– Surface: black , white , Titanium coated
– Split point DIN1412C
– Point angle: 118° or 135°
– Point cut: type N
– Cutting Direction: right-hand cut
– Cylindrical / Straight shank
– Tolerance: h8
– Helix angle: 25-30°
Applications
– materials up to 900N/mm²
– alloyed and not alloyed steels, castings
– sintered metals, wood, plastics
– graphite, bronze, brass
-
HSS Twsit Drill Bits Sets
-
5PCS HSS Drill Bit Set (M-1052)
-
5PCS HSS Drill Bit Set (M-1051)
-
DIN345 Morse Taper Shank Drill Bits
Technical data
– Standard: DIN 345
– Material : HSS, HSS M2,M35
– Process: Rolled , Fully ground
– Surface: black , white , Titanium coated, Amber
– Normal Point
– Point angle: 118°
– Point cut: type N
– Cutting Direction: right-hand cut
– Morse Taper shank
– Tolerance: h8
– Helix angle: 20-30°
Applications
– materials up to 900N/mm²
– alloyed and not alloyed steels, castings
– sintered metals, wood, plastics
– graphite, bronze, brass
-
1/2” Shank Silver & Deming Drill Bits
Features:
– 1/2”Reduced shank
– 3 Flats on shank or Straight shank
– 118° or 135° Split Point
– Material : HSS, HSS M2,M35(Cobalt 5%)
– Process: Milled Ground
– Point cut: type N
– Cutting Direction: right-hand cut
Applications
– Ideal for portable drilling and drill presses, where the maximum chuck capacity is 1/2″ .
– Used extensively in machine shops, maintenance departments, garages and body shops .
– Strong web construction provides greater strength and rigidity to drill in hard-to-drill materials like stainless steel and titanium alloys
-
DIN1869 Extra Long Type Drill Bits
Technical data
– Standard: DIN 1869
– Material : HSS, HSS M2,M35
– Process: fully ground
– Surface: black , white , Titanium coated
– Split point DIN1412C
– Point angle: 118° or 135°
– Point cut: type N
– Cutting Direction: right-hand cut
– Cylindrical / Straight shank
– Tolerance: h8
– Helix angle: 25-30°
Applications
– materials up to 900N/mm²
– alloyed and not alloyed steels, castings
– sintered metals, wood, plastics
– graphite, bronze, brass
-
DIN338 HSS-R Twist Drill Bits
Features
– Standard: DIN 338
– Material : HSS
– Process: Roll-forged , Polished (Edge Ground , Half Ground)
– Surface: black , white , Titanium coated
– Normal point
– Point angle: 118°
– Point cut: type N
– Cutting Direction: right-hand cut
– Cylindrical / Straight shank
– Tolerance: h8
– Helix angle: 25-30°
Applications
– materials up to 900N/mm²
– alloyed and not alloyed steels, castings
– sintered metals, non- ferrous metals, plastics
-
DIN1897 Short Type Drill Bits
Technical data
– Standard: DIN 1897
– Material : HSS, HSS M2, M35
– Process: fully ground
– Surface: black , white , Titanium coated, Amber
– Split point DIN1412C
– Point angle: 118° or 135°
– Point cut: type N
– Cutting Direction: right-hand cut
– Cylindrical / Straight shank
– Tolerance: h8
– Helix angle: 25-30°
Applications
– materials up to 900N/mm²
– alloyed and not alloyed steels, castings
– sintered metals, wood, plastics
– graphite, bronze, brass