-
DIN1869 Extra Long Type Drill Bits
Technical data
– Standard: DIN 1869
– Material : HSS, HSS M2,M35
– Process: fully ground
– Surface: black , white , Titanium coated
– Split point DIN1412C
– Point angle: 118° or 135°
– Point cut: type N
– Cutting Direction: right-hand cut
– Cylindrical / Straight shank
– Tolerance: h8
– Helix angle: 25-30°
Applications
– materials up to 900N/mm²
– alloyed and not alloyed steels, castings
– sintered metals, wood, plastics
– graphite, bronze, brass
-
DIN341 Morse Taper Long Type Drill Bits
Technical data
– Standard: DIN 341
– Material : HSS, HSS M2,M35
– Process: Fully ground
– Surface: black , white , Titanium coated, Amber
– Normal Point
– Point angle: 118°
– Point cut: type N
– Cutting Direction: right-hand cut
– Morse Taper shank
– Tolerance: h8
– Helix angle: 20-30°
Applications
– materials up to 900N/mm²
– alloyed and not alloyed steels, castings
– sintered metals, wood, plastics
– graphite, bronze, brass
-
HSS Twist Drill Bits Sets
-
1/2” Shank Silver & Deming Drill Bits
Features:
– 1/2”Reduced shank
– 3 Flats on shank or Straight shank
– 118° or 135° Split Point
– Material : HSS, HSS M2,M35(Cobalt 5%)
– Process: Milled Ground
– Point cut: type N
– Cutting Direction: right-hand cut
Applications
– Ideal for portable drilling and drill presses, where the maximum chuck capacity is 1/2″ .
– Used extensively in machine shops, maintenance departments, garages and body shops .
– Strong web construction provides greater strength and rigidity to drill in hard-to-drill materials like stainless steel and titanium alloys
-
DIN333A/B HSS Centre Drill Bits
Technical data
– Standard: DIN 333A
– Centre Angle : 60°
– Point angle: 120°
– Material : HSS, HSS M2,M35
– Process: fully ground
– Surface: black , white , Titanium coated
– Point cut: type N
– Cutting Direction: right-hand cut
– Tolerance: h9
Applications
– For Making centre holes according to DIN332 sharp A
– center drills have flutes and cutting points on both ends. this allows the user with the ability to reverse the drill and utilize both ends.
– Available for all Kinds of Materials: Metal, Alloy, Copper, Iron, Wood, Aluminum, and so on.
-
DIN338 HSS-Cobalt 5% Twist Drill Bits Ideal for Stainless Steel
Technical data
– Standard: DIN 338
– Material : HSS Co ( M35 )
– Process: fully ground ( HSS-G )
– Surface: amber , white
– Split point DIN1412C
– Point angle: 118° or 135°
– Point cut: type N
– Cutting Direction: right-hand cut
– Cylindrical / Straight shank
– Tolerance: h8
– Helix angle: 25-30°
Applications
– materials up to 1100N/mm²
– Ideal for stainless steel
– alloyed and not alloyed steels, sintered metals, cast iron, cast steel, acid and heat-resistant steels
– graphite, bronze, brass
-
DIN1870 Morse Taper Extra Long Drill
Technical data
– Standard: DIN 1870
– Material : HSS, HSS M2,M35
– Process: Rolled , Fully ground
– Surface: black , white , Titanium coated, Amber
– Normal Point
– Point angle: 118°
– Point cut: type N
– Cutting Direction: right-hand cut
– Morse Taper shank
– Tolerance: h8
– Helix angle: 20-30°
Applications
– materials up to 900N/mm²
– alloyed and not alloyed steels, castings
– sintered metals, wood, plastics
– graphite, bronze, brass
-
DIN340 Long Type Drill Bits
Technical data
– Standard: DIN 340
– Material : HSS, HSS M2,M35
– Process: fully ground
– Surface: black , white , Titanium coated
– Split point DIN1412C
– Point angle: 118° or 135°
– Point cut: type N
– Cutting Direction: right-hand cut
– Cylindrical / Straight shank
– Tolerance: h8
– Helix angle: 25-30°
Applications
– materials up to 900N/mm²
– alloyed and not alloyed steels, castings
– sintered metals, wood, plastics
– graphite, bronze, brass
-
DIN338 HSS-R Twist Drill Bits
Features
– Standard: DIN 338
– Material : HSS
– Process: Roll-forged , Polished (Edge Ground , Half Ground)
– Surface: black , white , Titanium coated
– Normal point
– Point angle: 118°
– Point cut: type N
– Cutting Direction: right-hand cut
– Cylindrical / Straight shank
– Tolerance: h8
– Helix angle: 25-30°
Applications
– materials up to 900N/mm²
– alloyed and not alloyed steels, castings
– sintered metals, non- ferrous metals, plastics
-
DIN333A HSS Centre Drill Bits
Technical data
– Standard: DIN 333A
– Centre Angle : 60°
– Point angle: 120°
– Material : HSS, HSS M2,M35
– Process: fully ground
– Surface: black , white , Titanium coated
– Point cut: type N
– Cutting Direction: right-hand cut
– Tolerance: h9
Applications
– For Making centre holes according to DIN332 sharp A
– center drills have flutes and cutting points on both ends. this allows the user with the ability to reverse the drill and utilize both ends.
– Available for all Kinds of Materials: Metal, Alloy, Copper, Iron, Wood, Aluminum, and so on.
Read MoreQuick View
Read MoreQuick View
Read MoreQuick View
Read MoreQuick View
Read MoreQuick View
Read MoreQuick View
Read MoreQuick View
Read MoreQuick View
Read MoreQuick View