-
DIN345 Morse Taper Shank Drill Bits
Technical data
– Standard: DIN 345
– Material : HSS, HSS M2,M35
– Process: Rolled , Fully ground
– Surface: black , white , Titanium coated, Amber
– Normal Point
– Point angle: 118°
– Point cut: type N
– Cutting Direction: right-hand cut
– Morse Taper shank
– Tolerance: h8
– Helix angle: 20-30°
Applications
– materials up to 900N/mm²
– alloyed and not alloyed steels, castings
– sintered metals, wood, plastics
– graphite, bronze, brass
-
Double Ended Drill Bits
Technical data
– Material : HSS, HSS M2,M35
– Process: fully ground
– Surface: black , white , Titanium coated
– Split point DIN1412C
– Point angle: 118° or 135°
– Point cut: type N
– Cutting Direction: right-hand cut
– Cylindrical / Straight shank
– Tolerance: h8
– Helix angle: 25-30°
Applications
– materials up to 900N/mm²
– alloyed and not alloyed steels, castings
– sintered metals, wood, plastics
– graphite, bronze, brass
-
DIN333A/B HSS Centre Drill Bits
Technical data
– Standard: DIN 333A
– Centre Angle : 60°
– Point angle: 120°
– Material : HSS, HSS M2,M35
– Process: fully ground
– Surface: black , white , Titanium coated
– Point cut: type N
– Cutting Direction: right-hand cut
– Tolerance: h9
Applications
– For Making centre holes according to DIN332 sharp A
– center drills have flutes and cutting points on both ends. this allows the user with the ability to reverse the drill and utilize both ends.
– Available for all Kinds of Materials: Metal, Alloy, Copper, Iron, Wood, Aluminum, and so on.
-
HSS Twist Drill Bits Sets
-
DIN338 HSS-Cobalt 5% Twist Drill Bits Ideal for Stainless Steel
Technical data
– Standard: DIN 338
– Material : HSS Co ( M35 )
– Process: fully ground ( HSS-G )
– Surface: amber , white
– Split point DIN1412C
– Point angle: 118° or 135°
– Point cut: type N
– Cutting Direction: right-hand cut
– Cylindrical / Straight shank
– Tolerance: h8
– Helix angle: 25-30°
Applications
– materials up to 1100N/mm²
– Ideal for stainless steel
– alloyed and not alloyed steels, sintered metals, cast iron, cast steel, acid and heat-resistant steels
– graphite, bronze, brass
-
DIN1870 Morse Taper Extra Long Drill
Technical data
– Standard: DIN 1870
– Material : HSS, HSS M2,M35
– Process: Rolled , Fully ground
– Surface: black , white , Titanium coated, Amber
– Normal Point
– Point angle: 118°
– Point cut: type N
– Cutting Direction: right-hand cut
– Morse Taper shank
– Tolerance: h8
– Helix angle: 20-30°
Applications
– materials up to 900N/mm²
– alloyed and not alloyed steels, castings
– sintered metals, wood, plastics
– graphite, bronze, brass
-
DIN1897 Short Type Drill Bits
Technical data
– Standard: DIN 1897
– Material : HSS, HSS M2, M35
– Process: fully ground
– Surface: black , white , Titanium coated, Amber
– Split point DIN1412C
– Point angle: 118° or 135°
– Point cut: type N
– Cutting Direction: right-hand cut
– Cylindrical / Straight shank
– Tolerance: h8
– Helix angle: 25-30°
Applications
– materials up to 900N/mm²
– alloyed and not alloyed steels, castings
– sintered metals, wood, plastics
– graphite, bronze, brass
-
DIN341 Morse Taper Long Type Drill Bits
Technical data
– Standard: DIN 341
– Material : HSS, HSS M2,M35
– Process: Fully ground
– Surface: black , white , Titanium coated, Amber
– Normal Point
– Point angle: 118°
– Point cut: type N
– Cutting Direction: right-hand cut
– Morse Taper shank
– Tolerance: h8
– Helix angle: 20-30°
Applications
– materials up to 900N/mm²
– alloyed and not alloyed steels, castings
– sintered metals, wood, plastics
– graphite, bronze, brass
-
1/2” Shank Silver & Deming Drill Bits
Features:
– 1/2”Reduced shank
– 3 Flats on shank or Straight shank
– 118° or 135° Split Point
– Material : HSS, HSS M2,M35(Cobalt 5%)
– Process: Milled Ground
– Point cut: type N
– Cutting Direction: right-hand cut
Applications
– Ideal for portable drilling and drill presses, where the maximum chuck capacity is 1/2″ .
– Used extensively in machine shops, maintenance departments, garages and body shops .
– Strong web construction provides greater strength and rigidity to drill in hard-to-drill materials like stainless steel and titanium alloys
-
DIN340 Long Type Drill Bits
Technical data
– Standard: DIN 340
– Material : HSS, HSS M2,M35
– Process: fully ground
– Surface: black , white , Titanium coated
– Split point DIN1412C
– Point angle: 118° or 135°
– Point cut: type N
– Cutting Direction: right-hand cut
– Cylindrical / Straight shank
– Tolerance: h8
– Helix angle: 25-30°
Applications
– materials up to 900N/mm²
– alloyed and not alloyed steels, castings
– sintered metals, wood, plastics
– graphite, bronze, brass
Read MoreQuick View
Read MoreQuick View
Read MoreQuick View
Read MoreQuick View
Read MoreQuick View
Read MoreQuick View
Read MoreQuick View
Read MoreQuick View
Read MoreQuick View
Read MoreQuick View